Cube FPV

BetaFPV Pavo Pico Whoop Frame
BetaFPV Pavo Pico Whoop Frame

14.00 AUD

3 in stock

Pavo Pico Brushless Whoop Frame

Pavo Pico is the Smallest 2S Sub100g DJI O3 Cinewhoop frame, compatible with other mainstream HD digital VTX on the market, such as Walksnail Avatar Pro Kit, Vista Kit, etc. Based on feedback from pilots during the BETA TEST before, we have made upgrades to the frame, such as lowering the battery slot height and adding filters and camera protection parts. These improvements will maximize the advantages of the camera and HD digital VTX providing, enabling a unique and unparalleled flying experience for pilots.

Bullet Point
  • HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.
  • Incorporating an angle-limited lens protection print and DJI O3 series filters, It is recommended to purchase, which can increase safety and improve visual quality.
  • The Rubber Damper Vibration damping design reduces low-frequency vibrations and is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
  • To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods. Additionally, larger batteries can be installed by using battery straps or printed components.
  • The DJI O3 can be directly installed, while Avatar and Vista require a 20*20 mounting plate and screws (included) for fixing.
Specifications
  • Item: Pavo Pico Brushless Whoop Frame
  • Material: PA12
  • Wheelbase: 80.8mm
  • Battery Slot Size: 16mm*12.7mm
  • Camera Installation Spacing: 19mm/20mm
  • Color: Transparent grey
  • Weight: 13.80g/11.62g
  • Motor Mounting Hole Position: 3-M1.4-φ6.6mm
  • FC Pattern: 26×26mm

HD VTX Mounting Bracket

This frame is compatible with mainstream HD digital VTX on the market, such as Walksnail Avatar Pro Kit, Vista Kit, etc.
Example Builds – DJI 03 – WalksnailV2 – Caddx Vista

We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera’s installation height has been lowered with a protective printed part to limit its movable angle to within 30°. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD video output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage. And The whole quadcopter is presented with the installation bracket of the DJI O3 digital transmission original antenna.

Die-cast screws in this frame design offer benefits such as increased whoop quadcopter strength and precision, enhance flight stability, and improved reliability.

The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount.

DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.

Troubleshooting:
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:
The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.
Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller’s rotation.
Upgrade Low Profile Design
After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop.

Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:

Carbon Fiber VTX Adapter
We found that the installation dimensions of the Vista and Avatar HD Pro digital VTX modules closely match those of the O3 digital VTX. Thus, Installing a carbon plate with mounting holes that measure 20x20mm is sufficient to mount both digital VTXs. Install quickly and effortlessly, while meeting pilots’ various DIY needs, and exploring more possibilities for flying.


Recommend Parts

FC&ESC: F4 1S 12A AIO V3 / F4 1S 12A AIO V2.2
Motor: 1102 | 14000kv Brushless Motor
Propeller: GF 45mm 3-Blade Propeller, GF 45mm 2-Blade Propeller
Battery: 2S 450mAh 45C Lipo Battery

Kit Includes
  • 1 * Pavo Pico Frame
  • 1 * Pavo Pico Top Plate
  • 1 * Frame FC Screw Package
  • 1 * VTX Bracket Screw Package
  • 1 * 20*20mm VTX Mounting Plate
  • 2 * DJI O3 HD Digital VTX Mounting Bracket
  • 2 * DJI O3 HD Digital VTX Antenna Mount
  • 2 * 5.8g Copper Tube Antenna