This is a great frame for a digital build being comaptible with Vista and 03 Air Units. It also has 19 to 20mm camera spacing so you don’t have to use a micro camera. Also, with this frame you have separate arms instead of an all in one bottom plate saving time for repairs.

Specifications
Arm Thickness: 3.5mm
Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Frame Size: Inch 134mm
Frame Height Internal:
* VTX Space – 21mm
* FC Mount Space for 20×20 Mount: 16mm
* FC Mount Space for 25.5×25.5 Mount: 13mm
Frame Weight: 43g
FC Mount Holes: 20x20mm (25.5 x 25.5mm with adapter plate)
VTX Support O3 and vista (Both 25.5 and 20mm hole spacing)
Motor Mount Spacing: 9mm (4 holes) and 12mm (3 holes)
Camera Mount Cage Spacing: 19 – 20mm
Replacement Arms: Available $5 each (Contact us)

Kit Includes
Carbon Frame Parts
Bolts and Nuts Fitout Kit
M2 Standoffs
Battery Pad
6 x Cable Ties
2 x Capacitors
2 x Battery Straps
TPU Parts
* VTX Antenna Mount
* Rx Antenna Mount
* Front bottom plate bumber
* Motor / Arm Protectors
* Camera cage with 4K cam mount on top

Arms are removable without removing the stack.

Channel design allows mounting of receiver and other components under the flight controller.

Mount adapter for 25.5mm x 25.5mm flight controllers.
Use the shorter bolts in the 20×20 mount position to secure the 25.5×25.5 adapter plate.

Nuts are inserted into the TPU to secure the camera cage to the frame.

Center and rear mounting for FC and VTX

Handy slots for the battery strap keep it in place as well as stopping it from coming in conatct
with the flight controller.

TPU Parts

Battery Straps – 2 lengths for 3S and 4S

Carbon Parts

Kit Parts

* Camera cage without cam mount on top