6.80 AUD
TPU Camera Mount Flange Nuts – M2 and M3 sizes. These flange nuts are more secure than just screwing the TPU camera mount onto the frame using the frame stand-off screws.
M2 Weight – 0.13 grams each
M2 Weight – 0.33 grams each
Material: Brass
I always use these flange nuts on all of my builds that have a TPU camera mount. I got so sick and tired of repairing TPU mounts that I went out and found a suitable nut to securely tie them down. This is what you need to use.
Attach these to your frame stand-off screws and screw them firmly down into the PTU.
The flange on the nut helps hold the TPU mount securely, but the real advantage in using this system is the part that extends down through the TPU and seats against the carbon top plate. Having this part allows you to screw the bolt down tight without the screw head being drawn down through the TPU all the way down to the frame. This allows you to tighten the stand-off bolt securely, giving more strength to the frame as well as holding the TPU mount securely in place.
In this example below, the stand-off bolt that also holds the TPU mount in place is screwed down tight against the frame. It won’t go any further. The TPU mount has compressed a little in the process but the flange and head of the screw stay above the TPU holding it securely in place.