The perfect combination for a light-weight 2 inch ripper with options for analog or digital builds. This build keeps the weight down by using AIO boards with built in ELRS and analog VTX. Digital setups are plug n play with the FC specified below.
One of the best frames for a DIY 2 inch build. This frame features a 25.5 x 25.5 AIO FC mount with the option for a digital VTX mounted on top with 18mm of clearance for the stack. The squished X geometry also make it great for freestyle and ripping around the neighbourhood.
For Analog Builds.
Nothing more to add – this board does it all keeping the weight down. If you’re going analog, you’re going to rip!
* Built in Serial ELRS (on UART)
* Built in 400mw Analog VTX
* 1-2S 12Amp ESC
For DIGITAL Builds
This FC has a switchable 9 volt 2 Amp BEC on the VTX plug making it perfect for a digital VTX.
* Built in Serial ELRS (on UART)
* 1-2S 12Amp ESC
* Switchable 9V BEC
* Plug n play external VTX
Best performance for this setup is a 1002 at 14,000KV, or a larger 1003 size motor at 1,000KV. My personal choice is 1003.
A perfect match for this motor is the GF 2023. This is the same prop as used on the YMZFPV BNF Lighting and the HGLRC Draknight.
Light weight with no cable connectors on the camera back but still has M2 mount screws.
The best light-weight solution if you really want an RHCP anyenna.
For an analog build go with the GOKU F405 ERVT FC wich has a built in analog VTX.
The Runcam Nano4 camera is light weight. You’ll need to cut the connector off and solder straight to the FC.
The GOKU F405 EVRT comes with a whip style antenna. It’s fine and all you need. But if you must have an RHCP antenna then choose the Maple Wireless one.
DJI 04 VTX Option
25.5 x 25.5mm Mount
1S – 3S
You will also need one of these adapter prints to use the DJI 04 (lite) camera in this frame which has a 14mm camera mount.
Walksnail Avatar VTX Option
25.5 x 25.5mm Mount
1S – 3S / 14mm Cam
For Walksnail use the HD Mini which has the 14mm camera with M2 mounting.
HD Zero VTX Options
25.5 x 25.5mm Mount
1S – 3S
25.5 x 25.5mm Mount
2S – 6S
25.5 x 25.5mm Mount
1S – 3S
The best choice is the Eco VTX, but the VTX bundle won’t have a camera with M2 mounting so choose a 14mm camera from below.
14mm Mount
14mm Mount
14mm Mount
14mm Mount
14mm Mount
14mm Mount
Note: This frame comes with a whip style antenna so no additional antenna is needed for HD Zero systems.
BT3.0 High Amp connectors
BT3.0 Charger
My perfect choice for a battery / plug solution is this high-amp BT 3.0 system.
However your battery lead needs will depend on the battery you choose or have on hand. If not using BT 3.0, your next best choice is one with an XT30 connector. Choose a 2S battery from 450 to 550mAh.
Both the GOKU F405 ERVT and the The Goku F405 HD flight controllers are supplied with XT30 connectors.
Note: The FC stack mount bolts supplied with this frame are 11mm which is fine for AIO board mounting – for an analog setup. However if you are mounting a digital VTX above the FC then you will need longer 16mm bolts.
You will also need to purchase some M2 Nuts.
