XING 2005 2550KV 4-6S FPV Motor unibell

Description
Our new XING 2005 motor was specially designed for ultra-light or toothpick 5 inch rigs around 250g. XING technology inside for ultra smooth and powerful flight experience. Available in 2550KV (4S) or 1900KV (6S) which can be coupled with our new Nazgul 5030 props or any other 1.5mm shaft prop on the market.

Features
3mm inner shaft, 1.5mm outer titanium alloy shaft
Japanese NSK φ8*φ3*4 bearings
N52H curved magnets
Motor wires protected
Dynamically balanced
Specifications
KV: 2550KV
Weight(included wire): 21g
Dimension: φ26.8*15mm
Interphase Resistance: 130.8mΩ
Input Volts: 16.8V
Peak Current: 24.1A
Max Watt: 390.6W
Mounting Holes: 12*12 φ2mm
Rotor Specifications: Unibell
Shaft Diameter: 5mm
Shaft Protruding Length: 4mm
Magnet: N52H Curved
Configuration: 12N14P
Bearing Type: NSK
Bearing Specification: φ8*φ3*4
Winding: Single Strand copper winding

Packing List
1x XING 2005 Motor
4x M2*6 screws
6x M2*7 screws

NOTE
Only purchase these motors if your drone originally came with them. These motors have an EClip around the shaft that requires a larger hole in the arm than most drones have. Also, the prop M2 mount holes are wider apart than all other props. You must use the specific iFlight props for this motor.

FPV Motor Sizes Guide	FPV Motor Volume Guide
See this Motor Size Guide for information on what sizes of motors are used in popular BNF and PNP FPV drones.	See this Motor Volume Guide for information about what other motor size is similar to the one you are looking for.