Build Blueprint 3inch 01

The best frame for 3 inch freestyle builds that’s even DJI 04 compatible. This frame can mount a 20×20 stack or 25.5 x 25.5mm AIO using the adapter plate. VTX mounting in the rear is suitable for any VTX and full size 19 to 20mm camera mounting.

Choose your frame!
This frame comes in 3 versions – Budget – Mid-Range and DJI 04 Compatible Premium

Budget Version
* TPU camera cage
* All VTX systems except DJI 04

Mid-Range Version
* Alloy camera cage
* All VTX systems except DJI 04

Premium Version
* Alloy camera cage
* All VTX systems including DJI 04

Stack Option 1
You: Want plug n play
Minimum soldering with this stack option. Even the analog camera and receiver can be plug n play (of course you need to solder the other end). All the features you would expect but no Bluetooth.

Stack Option 2
You: Plugs are for wimps – real pilots solder!
All pads broken out and ready for soldering, this is a full featured stack with everything you would expect including Bluetooth.

AIO Option 1
* Plug for HD VTX systems (9V Regulated)
* Bluetooth
A full featured FC with alloy heat sinks for protection and cooling.

AIO Option 2
* Plug for HD VTX systems (But not regulated – Vbatt is passed through)
* No Bluetooth
A great choice from and a reputable brand. Only 8.9 grams compared to the SpeedyBee option at 13.5 grams.

For a 3 inch freestyle build the best place to be is 1404 and around 3,500 to 3,600KV

Budget Motor Selection

Premium Motor Selection

Keep your props around 3020 (20 degree pitch) for best handling with a 1404 motor at about 3,500KV

A nice light-weight option for a 3 inch build but still with a reliable MMCX connector. Mount holes are M3 so you will also need these mount adapters.